Bob

HAS Supergun v4.2 In Stock

The Home Arcade System (HAS) – widely known as one of the best superguns ever made – is now back in stock.  The price is $130 plus shipping and it includes the supergun, plexi case and power supply cable.  Kick harnesses and extra accessories can be purchased separately in the store;  You’ll have to buy your PSU elsewhere.  More info below the links:

Purchase here:  https://rgbslab.com/products/has-v4-2
Main Store:  https://rgbslab.com/collections/products
Recommended PSU’s =
Meanwell RT 65A, 85A or 125Ahttps://amzn.to/3mEH8el

General

  • JAMMA, JAMMA+, and “CHAMMA” compatible
  • Built-in voltmeter (selectable +5 V/+12 V)
  • Comes with a plexiglass case and a power supply harness
  • 142 x 88 x 35 mm total size with the plexiglass case (133 x 74 mm PCB size)
  • Modular build; can be upgraded using dedicated modules that sit “on top” of the HAS

Controls

  • DB15 controller ports (NeoGeo compatible, pinout extended to support buttons 5 and 6)
  • Programmable button layout
  • Programmable rapid-fire (VSync synchronized or asynchronous, 6 different fire rates)
  • Buttons 1-6 on the JAMMA connector (buttons 4-6 can be disabled)
  • Buttons 4-6 on the JST-XH 6 pin “kick harness” connector
  • Test and Service buttons

Audio-Video

  • Video output: Fully buffered 0.3-1 Vp-p 75 Ohm RGB (0.7 Vp-p nominal at the default potentiometer position), CSync 0.35 Vp-p 75 Ohm (can be set to TTL ~5 Vp-p 470 Ohm impedance)
  • Audio output: Unbalanced, attenuated to line level; stereo support for the NeoGeo MVS
  • Video on an 8 pin mini-DIN connector (XRGB mini/NESRGB pinout); audio on a 3.5 mm stereo connector or the 8 pin mini-DIN if the 3.5 mm stereo connector is not in use
  • CSync Regeneration feature
  • Selectable raw JAMMA/unprocessed CSync
  • Selectable Video Low Pass Filter
  • Brightness regulation using a single knob
  • Optional HSync and VSync outputs on the PCB (~5 Vp-p, TTL)
  • Can be upgraded to output video through an HD-15 connector (requires an HD-15 module)

Power

  • Power is delivered through a 6 pin JST-VH power connector (GND, +5 V, +12 V, -5 V)
Liked it? Take a second to support Bob on Patreon!